Looking for:
Graco 4ever extend2fit manual - |
- User manual Graco 4Ever Extend2Fit (English - pages)
Graco 4EVER EXTEND2FIT Manuals | ManualsLib - Need help?
Available languages. Quick Links. See also: Instruction Manual. Table of Contents. Previous Page. Next Page.
Summary of Contents for Graco 4Ever Page 1 www. Page 6 1-A Welcome to the Graco Family! No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk of serious injury or death.
Even if this car seat seems easy to figure out on your own, you must follow the detailed instructions in this instruction manual to ensure the steps below are performed correctly. Choose a suitable location for this car seat in your vehicle. Secure your child tightly in this car seat. Top of head must be 1 in. Page 9 Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall.
Page 10 For future reference or if you change addresses, record the model name, model number, date of manufacture and purchase date of this car seat on the below. You can find this information either on the registration card if you still have it or on the date label located on the back of the car seat.
Page 11 STOP using this car seat and throw it away 10 years after the date of manu- facture. Look for this sticker on back of the car seat. We also Page 12 Vehicle Seat Protection Protect vehicle seat. Use a car seat mat, towel, or thin blanket under and behind car seat.
Warm Weather Use Car seat parts can get very hot in the sun or warm weather. To avoid burns, always check before putting child in car seat. If an air bag inflates, it can hit the child and car seat with great force and cause serious injury or death to your child. Infants less than 20 lbs. Select a suitable location for the car seat in your vehicle. Their use could alter the performance of the car seat.
Page 16 According to the AAP , these infants may suffer breathing issues if improperly reclined in a car seat. When rear-facing, use the corrected age for preemies. Graco advises that you have your physician or hospital staff evaluate your infant and recommend the proper car Page 17 2-A Install Cup Holders Cup Holders To attach the cup holders, match the right cup holder to the right side of the seat and the left to the left.
Align the tab on the cup holder with the slot in the seat and slide down. Page 18 2-B Car Seat Features Recline the Car Seat Place the car seat in 1st, 2nd or 3rd recline position. Page 27 3. Continue to next step if it is not. Loosen Harness Straps Lift up on the harness release lever while pulling out on the harness straps at the chest clip. Page 28 5. Raise Headrest Squeeze the red handle and lift headrest up.
Unsnap Pad and Expose Seat Pan Undo the 2 snaps and pull bottom of seat pad to expose the plastic shell. Page 29 7.
Page 30 Replace Seat Pad Move headrest back to its proper position for your child. Store Top Tether Strap Attach tether hook to the plastic bar on either side of the car seat. For easier installation, extend the LATCH strap to its maximum length by pressing the grey button and pulling on the strap.
Page 32 3. The base should sit as flat as possible on the vehicle seat. Page 33 5. LATCH strap should lie flat and not be twisted. You may need to tighten through the slit in the pad at the belt path as shown. Page From Vehicle 7. If the seat moves less than 1 in.
Page 36 3. Route the Vehicle Seat Belt Thread vehicle seat belt through the rear-facing belt path marked with a blue label and out the other side. Buckle it. The seat belt should lie as flat as possible and not be twisted. Page 38 Press down firmly in the center of the car seat. Pull on the shoulder belt to tighten while feeding the slack back in the retractor. Test For Tightness Grab the sides of the seat where the vehicle seat belt is and slide the car seat side-to-side and front-to-back.
Car seat should not move at the forward-facing belt path more than 1 in. Adjust the Car Seat Place the car seat in the 4th, 5th or 6th recline position. Page 44 6. Page 45 9. Page 47 3. Page 48 5. LATCH strap should not be twisted. Page 49 7. Tighten the Tether Strap Push the car seat back while tightening the tether strap to remove all the slack.
Page 51 3. Route the Vehicle Seat Belt Thread vehicle seat belt through the forward-facing belt path marked with a orange label and out the other side. Page 53 Press down firmly in the center of the car seat. Store the Harness Straps Loosen the shoulder straps as much as possible.
Raise the headrest to the highest position. Unbuckle the chest clip and the crotch buckle. Page Seat Back 2. Lift the headrest pad flap up out of the way. Unsnap Bottom Seat Pad Undo the 2 lower snaps. Page 58 4. Open the Harness Storage Door 6. Page 59 7. Store Buckle as Shown 8. Replace Seat Pad Move the headrest back to its proper position for your child. Page 61 2.
Page 62 4. Page 63 6. Remove the Seat Back by First Loosening the Harness Straps Lift up on the harness release lever while pulling out on the harness straps at the chest clip. Page 65 3. Unsnap Bottom Seat Pad Unsnap seat pad and expose the bottom of seat base. Lift the Red Backrest Lock Lift the red backrest locks up and slide together. Page 66 6. To replace the seat back, reverse steps 4 though 6. Relock the Red Backrest Locks Make sure they are both flat and locked into place Page 67 8.
Store Splitter Plate Pull the harness adjustment strap all the way out and then store the splitter plate. Store Buckle Strap Page 68 5-E Install Backless Booster 1. Page 69 6-A Securing Child 5-point Harness 1. Place harness straps off to the sides.
No comments:
Post a Comment